IP camera hardware testing and installation instruction

IP Camera should be tested before installation to ensure you minimize the re-work time.

  1. Test camera power:
    1. Using 48 V PoE switch or 12 V power adaptor.
    2. After connect to power, cover the camera lens to see if the infrared light turns on (you will hear a click).
  2. Test SD card:
    Run Cam_Setup program and click “Mini DVR”

    test-config-sd

    test-sd-status

    test-sd-card-status2

     

  3. Update to latest firmware
    How to find out if the camera contains the latest firmware?

    update-firmware

    update-firmware-window

  4. Pre-installation camera setup and configuration
    This step is optional, you configure some of the camera settings before or after installation.